Latest News in Newsletter
Demonstration Report - HY24 Hydraulic Submersible Pump
Jan 31, 2012
Challenge: Identify if the Dragflow HY24 Hydraulic Submersible Pump and pumping system could remove the slime build-up in the two consecutive underground dams, Dirty Dam and Clean Dam, quickly and more efficiently than the conventional piston pump slime removal system currently being used.
Purpose: The slime removal process results in a critical increase in the water holding capacity at the two dams which is relied upon to reduce the amount of sediment reaching the permanently installed high head multistage pumps.
Demonstration Location: Gold mine near Timmins, Ontario.
Latest News in Newsletter
Port Hope Declared A Water Emergency
Nov 29, 2011
A 6-year old Port Hope Water Treatment Plant experienced a simultaneous failure to 2 out of 5 high lift pumps due to impeller wear which resulted in the plant operating at only 47 per cent capacity. The pumps failure created a serious concern in the surrounding residential and industrial areas and led the Municipality to declare a water emergency and urged residents and businesses in the ward to limit their water usage until the situation was resolved. Specifically, businesses needed to abide by the Municipality's request to keep their water consumption to below 100 cubic metres per day.
Latest News in Newsletter
Wastewater Treatment Plant Complete Flow Bypass
Oct 31, 2011
CASE STUDY: Wastewater Treatment Plant Complete Flow Bypass
Aquatech offers environmentally secure temporary bypass pumping solutions for wastewater treatment plants: design, installation, operation, maintenance, sanitization and removal to fully address your project scope and overcome project specific issues and environmental challenges. The following case study is brief illustration of how Aquatech manages and ensures an efficient operation for wastewater treatment plant bypass.
Latest News in Newsletter
Reverse Circulation Dual Rotary DR24 Drillrig
Sep 30, 2011
Aquatech is proud to introduce our new DR24; the Dual Rotary drilling method has been proven repeatedly where unconsolidated formations (sand, gravel, cobbles, and boulders) make it difficult to drill a cased hole using conventional drilling techniques. The versatility of this unique drilling rig, in both straight and angled applications, makes it one of the most efficient and cost effective methods for drilling in difficult formations.
Latest News in Newsletter
Creek Bypass
Aug 31, 2011
Choosing the proper bypass pumping system is a critical element when working on rehab projects which involves creek bypassing. Each creek bypass is unique and requires detailed assessment, planning and permitting before implementation. Below are just some of the general questions one must ask to minimize risk and ensure a successful creek bypass:
Latest News in Newsletter
Bypass Pumping System
Aug 01, 2011
Many bypasses are similar in appearance and name, but it’s their subtle differences that require close attention to fully understand component performance parameters. To determine the right pump, we first need to understand many different aspects of the physical conditions of the application – Flow, Lift/Pump Strength, and Distance.
FLOW – is the quantity of liquid being discharged over time calculated in gallons per minute or litres per second. Flow determines the line size of the piping or hose.
LIFT – the total lift combines the suction and discharge lift. Lift determines the pump strength.
DISTANCE – the length of the hose/pipe to discharge. Distance determines if the line size should be up-sized to reduce friction loss.
Latest News in Newsletter
New Website Launch
Jun 15, 2011
We are pleased to announce the launch of our new Aquatech website. The motivation for redesigning our website is to demonstrate the growth and focus we have experienced as well as showcase the areas we will continue to strive for moving forward. The new website brings together Aquatech's unique and specialized ability built around our standard of service and the strength of our diversified rental and sale pumping fleet.
Latest News in Newsletter
How Do You Clean a Stormwater Management Pond?
Jun 02, 2011
How do you clean a stormwater management pond (SMWP) without draining the pond first?
A clean-out of the SWMP is required once every 5-15 years to remove accumulated sediments to ensure the pond continues to function as intended. Drainage of the SWMP is not always required to facilitate the clean-out.
Latest News in Newsletter
Best Management Practices
Feb 05, 2011
Best Management Practices, (BMPS), for Discharging Water From a Construction Site.
Having problems on your job site with regulations related to pumping water from your site? Discharge water may carry harmful compounds that can, and have affected our water quality and the ecosystem, hence the environmental agencies concerns.
Latest News in Newsletter
New Dragflow Pumps
Feb 13, 2011
How do you?
GORecent News Posts
- 29/11/11 - Port Hope Declared A Water Emergency... Read More
Archives
- Events
-
Newsletters
- Demonstration Report - HY24 Hydraulic Submersible Pump...
- Wastewater Treatment Plant Complete Flow Bypass...
- Reverse Circulation Dual Rotary DR24 Drillrig...
- Creek Bypass...
- Bypass Pumping System...
- New Website Launch...
- How Do You Clean a Stormwater Management Pond?...
- Best Management Practices...
- New Dragflow Pumps...
- Press releases
- Keep Building Knowledge of Environmental Regulation...
- Aquatech Dewatering expands services into Newfoundland and Labrador...
- Aquatech Dewatering Opens New Branch In Sudbury, Ontario...
- Stormwater Bypass and Treatment Project Protects Sensitive Cold...
- Organic Pumping and Treatment Solution...
- Aquatech Team Springs to Action...
- Aquatech, Supporting the Growth of Industry...
- Aquatech Answers Call from Environmental Agencies to Support...
